Model: BAUSLX2
Type: DIN3760 A type
Material: Simrit72 NBR902

1 Features
Cylindrical: Rubber
Spring-loaded sealing lip
Common seal lip shape, surface finishing sealing lip
The advanced sealing lip shape
2 Materials

Simrit NBR902:
Nitrile rubber hardness of 72 Shore A
The metal skeleton: DIN1624 low carbon steel
Spring: 17223 spring steel
3 operating conditions
  Medium: mineral oils, synthetic oils, greases and
T: 40 ° C to +100 ° C short-term up to +120 ° C
v: see catalog page 4 Figure
p: to 0.05 MPa (0.5 bar)

4 Benefits

Widely used in various fields of industry
Reliable seal cavity, even though it is rough, a large thermal expansion and can be reliably combined cavity sealed.
Suitable for sealing low viscosity and gases
Dust lip prevents light to moderate dust and dirt intrusion
Especially recommended for new designs
Cavity and machining standard
 
Axis: Tolerance: ISOh11
    Concentricity: IT 8
    Roughness R a = 0,2 - 0,8 m
        R z = 1,0 - 5,0 μm
        R max = <6,3 μm
    Hardness: 45-60 HRC
    Finish: None to the state, it is best to use horizontal feed grinding
Cavity: Tolerance: ISO H8
    Roughness: R z = 10 - 25 μm

6 Install
Required by DIN3760, careful installation is a prerequisite to ensure good seals

Shaft ¢ D1 size range
BAUX2: 12mm ~ 215mm
BAUSLX2: 20mm ~ 160mm